2200T Heavy Duty Electric Lifting Winch For Wind Power Generation
Installation Vessel
Product introduce
Other name | 2200T Heavy Duty Electric Lifting Winch For Wind Power Generation
Installation Vessel |
Power | Eletric |
Rope speed | 7m/min |
Rope diameter | 30-60mm |
Sling type | wire rope |
Direction rotation | Left or right |
Application | lifting winch |
Parameter | Can be designed |
Protection class | IP65 |
Motor | AC380V/50Hz |
Drum width | 900-1800mm |
Usage: Wind Power Generation Installation Vessel
Applicable Industries: Energy & Mining
Video outgoing-inspection: Provided
Machinery Test Report: Provided
Marketing Type: New Product
Warranty of core components: 1 Year
Core Components: Engine, Motor
Condition: New
Power Type: Electric
Place of Origin: China
Brand Name: LBS
Voltage: Three phase. 380V
Warranty: 1 Year
Rope Capacity: 500 meters
Product Specifictions: as per customer's requirement
Engine: Electric
Meterial: Steel
After-sales Service Provided: Online support, Video technical
support, Site installation, commissioning and training, Site
maintenance and repair service
Certification: CCS
Structure form
The winch converts the electric energy into mechanical energy
through the motor, that is, the rotor of the motor rotates the
output, through the triangle belt, shaft, gear, and then drives the
drum to rotate after deceleration. The reel winds the wire rope and
passes through the pulley block to make the crane hook lift or drop
the load, change the mechanical energy into mechanical work, and
complete the vertical transport loading and unloading work of the
load.
Installation of electric winch
The most important note here is the state of the rope drum, which
must be used to ensure that the lasso is evenly wound before the
process begins. The installation process is as follows:
1. Plug in the remote control. Connect the distal end of the first
plug-in winch.
2. Do not let the remote connection hang. If you are a driver,
operate the remote control from the driver's seat and then make
additional connections around the side mirrors of the car to make
co-working easier.
3. Open the noose, use the remote control to open the noose a bit,
and install it on the side of the electric winch.
Turn on the clutch. Please note that we have to open the hook later
to open the clutch.
5. Hold the rope hook hand. Grabbing the hook with one hand pulls
the rope out of the roller, so no matter how long the rope has been
twisted, it doesn't reach the hook.
6. Pull the rope on the pivot and lock the clutch.
So the electric winch is installed.
Introduction to pulling winch
The pulling winch consists of several parts, which are connected in
series by wire rope. The working principle is to drive the whole
system by the friction between the friction wheel and the wire
rope, and the friction wheel is connected with the drive device.
Generally, the width of the winch is within 1.5 m, which ensures
the compactness and reliability of the entire transport unit. The
traction winch is provided with tensioning device,
Our Company
Shijiazhuang Junzhong Machinery Manufacturing Co., Ltd. was
established in 2010 with a registered capital of 18 million yuan.
The company is a long-term engaged in cable retracting system of
scientific and technological production enterprises in the
multi-layer winding of wire rope has a profound foundation and
production experience.
the company obtained the utility model patent certificate suitable
for multi-layer winding lebus groove in 2010 and registered the LBS
trademark in 2013.
Passed iso9001:2015 quality management system certification in
2017;
In 2018, it passed the GJB9001C-2017 weapon equipment quality
management system certification.
In 2019, the company was identified as a science and technology
smes in Hebei Province.
In recent years, the company with strong technical strength,
advanced production equipment, strict quality control system,
achieved rapid development.
